MR160-11C sawtooth linter machine

MR160-11C sawtooth linter machine 1. awards national patent 2. high output. 3. low energy consumption 4. save labors

MR160-11C sawtooth linter machine  

 

 MR160-11C sawtooth linter machine  

 

1. all the front, rear and melamine plates are changed into round involute shape from its former arc shape, also the internal volume is increased so that the resistance force becomes less when the cottonseed roller rotates, so energy consumption is reduced.   MR160-11C sawtooth linter machine

 

 

2. the rib-strip is extended, the arc is changed, the extending length of saw blade is increased from 40mm to 48mm, and the saw tooth no. is increased from 57 to 67, so that the output is high. 

 

 

3.  MR160-11C sawtooth linter machine awards national patent and brings our customers excellent economic benefit.

4. during lint stripping, there is one automatic control and adjustment which can start and stop in order according to the principle of this delinting machine.

5. the motor of cottonseed feeding is equipped with 3-phase transducer (FRNE11SO.75)used for real-time control for cottonseed feeding amount so that the density of cottonseed roller can be subtle adjustment, and the output, quality and machine stability can be guaranteed.   

6. one operator controls 12 linters so the labor can be saved by 2 times.

(Water contained in cottonseed ≤10.5%   Lint in gross cottonseed ≥14   Grade 2,3 gross cottonseed)

  MR160-11C sawtooth linter machine

1. Main technical parameters	MR160-11C sawtooth linter machine
Process capacity (kg/h)
The first process capacity	4000-5300
The second process capacity	1200-1700
The third process capacity	950-1200
Lint output ratio (%)
The first lint output ratio	1.2-1.6
The second lint output ratio	5.0-7.5
The third lint output ratio	3.5-4.5
Short-time lint output (kg)
The first short-time lint output	0.29
The second short-time lint output	0.35-0.75
The third short-time lint output	0.22-0.4
Roller of saw-blade	(φ280-φ320)×1767.49(mm)
The first of the tooth-shape angle of saw blade is 40°, the second and the third is 28°( tooth height 5-5.5 mm) and the tooth tip height
Wind-speed at lint outlet	19-20 m/s (non-load)

2.  Motor option for MR160-11C sawtooth linter machine:

Y180M-4     18.5KW       Y160M-4       11KW       Y90S-4       1.1KW         Y80M2-4       0.75KW     

Raw material(ginned cottonseed) →   MR160-11C sawtooth linter machine → delinted cottonseed

                                   

                                                                              MR160-11C sawtooth linter machine

               

side of MR160-11C sawtooth linter machine

 

MR160-11C sawtooth linter machine